Complete! Really enjoy the construction process.

This is an entry level kit from Halinsky, gonna try some challenge ones in the future.

Connected the propeller and the fuselage with a spindle

Now that the propeller is assembled, I wonder if I should make it movable or simply glue it to the fuselage🤔

Propeller cap

Preparing the propellers

Installed the canopy

Gun sight

Preparing the cockpit canopy and some accessories, missing the window part of the reinforce front...

Machine guns

Installed the landing gears.

The rear landing gear

The main landing gear

I purchased the resin wheels to simplify the process 😜

Engine exhausts attached

Engine exhausts, painted with metallic color.

Oil cooler and air inlet

Glued the wing-fuselage connection

Small details

Plating under the engine

Glued the wing to the fuselage, start to look like a plane now

The entire wing is assembled and ready to attach to the fuselage

Preparing the wing flips

Radiator installed

Preparing the parts of the radiator

Before glueing the sheathing, I've sanded the attaching surface as inclined planes so that they are attached without exposing the edges. Maybe there are better ways handling this.

Main wing sheathing is done. I was a bit worry about glueing this part. The result looks OK.

Attached the recesses of wheels to the wing

Recesses for placing the wheels. Try putting them inside the rib see if they fit before glueing them to the wing sheating.

My work in progress moment for Halinski Spitfire Vb

Preparing the wing sheathing

The position of the notch of part VIIv seems wrong, have to cut it then glue them together.

Wing rib

To make the flaps movable, I attached them with blue stick instead of glue. I might glue them at the end if they don't hold up 😅

Horizontal stabilizer installed

Horizontal stabilizer parts are ready

Horizontal stabilizer and elevator rib

Completed the rudder

Connected the entire fuselage.

This time I glued each part separately before attaching them to the main body, it's a bit difficult to connect each section in the final step ...

Tail of the fuselage - vertical stabilizer

Completed the head of the fuselage.

Continue working on the head of the fuselage. All parts to be assembled...

Not making much progress theses days. Just finished the skeleton of the engine casing.

Made a mistake - interior part of the canopy was put outside 😅

Fortunately, I managed to fix it without any noticeable flaw.

Thank you @papiracky for letting me know, how amazing is to have someone building a similar model with you at the same time! 😉

Completed the cabin section.

Was not able to attach both ends, after sanding, finally close the gap.

Combined both the left and right sides

Left side of the cabin

Made these two cylinders (oxygen cans I guess?) from paper. Pretty happy with the end result.

Right side of the cabin

Control stick and dashboard

Working on the cockpit now

Some parts assembled 2 years ago

Halinski spitfire vb, started 2 years ago, not much progress... gonna resume the works, hope I can finish it this time.